Home > Diving Equipment > Tanks & Valves >

Faber SCUBA Diving Steel Tank

Faber SCUBA Diving Steel Tank


 
Our Price: $512.95

Vendor: Faber



Availability: Usually Ships in 1 to 2 Weeks
Product Code: HP-ST

Click to view another Cylinder Volume

Cylinder Volume*:

Click to view another Cylinder Valve

Cylinder Valve*:


Qty:  
Description
 
All tanks are Visually Inspected (VIP'd) and for safety reasons would be shipped without air. These tanks are Nitrox-Ready to 40%

HP100 HP120 HP117 HP133
Service Pressure 3442 psi 3442 psi 3442 psi 3442 psi
Buoyancy *Full
- 8.41 lbs - 8.82 lbs - 9.12 lbs - 9.08 lbs
Buoyancy *Empty - 0.59 lbs 0.65 lbs 0.16 lbs 1.45 lbs
Weight Empty
34 lbs 39.2 lbs 37.6 lbs 42.4 lbs
Outside Diameter 7.25" 7.25" 8.00" 8.00"
Length 25.3" 29.1" 24.2" 26.85
REE 86 cc 100 cc 100 cc 113 cc



Valves:


XS Scuba PVD PRO Valve:

  • Mil-Spec black PVD finish
  • Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
  • 3/4" - 14 NPSM standard inlet threads
  • Clean for pre-blended Nitrox up to 40% oxygen
  • 1.5 handwheel rotations from fully on to fully off
  • Dip tube included

Thermo Pro Valve:

  • Standard yoke outlet w/spin-out DIN insert converts to 230 bar DIN outlet
  • 3/4" - 14 NPSM standard inlet threads
  • Clean for pre-blended Nitrox up to 40% FO2 oxygen
  • O-ring sealed bonnet
  • Easy grip rubber handwheel
  • Threaded dip tube included
  • Service pressures: 2400, 3000, 3442 psi
Thermo DIN Valve:

  • Dedicated 300 bar DIN outlet
  • Attachment of DIN first stages only
  • 3/4" - 14 NPSM standard inlet threads
  • Standard inlet threads
  • Threaded dip tube included
  • Service pressures: 3000, 3500, 4350 psi
Thermo Modular PRO Valve:

  • Standard yoke outlet w/spin-out adapter converts to 230 bar DIN outlet
  • Modular access plug included
  • 3/4" - 14 NPSM standard inlet threads
  • Threaded dip tube included
  • Clean for pre-blended Nitrox up to 40% oxygen
  • Service pressure: 2400, 3000, 3442 psi
XS Scuba Modular PRO Valve:

  • Standard yoke outlet w/ spin-out adapter converts to 230 bar DIN outlet
  • Modular plug included
  • 3/4" - 14 NPSM inlet
  • Clean for pre-blended Nitrox up to 40% FO2
  • Service Pressure: 2400, 3000 or 3442 psi
  • Hex wrench tighten dip tube
  • O-ring sealed bonnet
Features
  • Triple-Protected Finish for long lasting durability. Process includes a zinc galvanization spray followed by an epoxy paint and then a polyurethane topcoat.
  • Exclusive Phosphatized-cleaned internal surface
  • Manufactured using the deep draw process with Chromium Molybdenum steel
  • DOT Special Permit #13488 and Transport Canada #SU7694-237
  • Oxygen cleaned for use with up to 40% pre-blended Nitrox
  • XS Scuba PRO valve with PVD finish and Safety Handwheel
  • High quality, injection-molded tank boot with round rim
  • 3442 psi working pressure
  • Inlet thread is standard 3/4"-14 NPSM
  • Built in Italy by Faber Cylinders with 40 years of experience
  • Sizes: 100 cu ft, 117 cu ft, 120 cu ft, 133 cu ft
  • Material: Steel

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 May 26, 2021
Reviewer: Sultan Alsemiery from Jeddah, Saudi Arabia  
Beside that it's an amazing product, the service provided by their team was excellent.

Was this review helpful to you?