Home > Diving Equipment > Tools >

Oceanears DRS-8 MOD 2 Underwater Speaker w/ Cage & 50 ft of Cable

Oceanears DRS-8 MOD 2 Underwater Speaker w/ Cage & 50 ft of Cable
 
Alternative Views:
Does not qualify for free shipping
Our Price: $1,800.00
Vendor: Oceanears


Availability: Build to order, usually ships in 3-4 Weeks Direct from the Manufacturer
Product Code: DRS-8-MOD-2
Qty:

Description What's in the box
 
Oceanears low-cost underwater speakers and loudspeakers are designed for use in diver recall systems, synchronized swimming sound systems, marine mammal recording and playback sound systems and any other system needing a hi-quality, low-cost means of projecting sounds underwater.
The OCEANEARS DRS-8 Portable Underwater Speaker is a state of the art Piezoelectric Flexural Disc Transducer that will provide years of reliable service and pleasing music underwater. The speaker comes with 50 feet of cable and a PVC cage. The Standard Warranty is FIVE Years. One speaker for a 25 yard 6 lane pool for music.
Features
  • State of the art in PIEZOELECTRIC FLEXURAL DISK TECHNOLOGY!
  • LONG LIFE CONSTRUCTION WITH PVC AND EPOXY.
  • Will not rust or corrode even if used in saltwater. Can be used in swimming pools with salt generators.
  • Galvanic corrosion has been eliminated. Non-Magnetic materials.
  • No metal exposed to the water, reducing the potential for electric shock.
  • No voice coil to burn out.
  • A completely passive, non-powered device. UL, CSA and CE are not required.
  • Acoustic power to spare with high efficiency.
  • Deep depth capability (130 feet/40 meters).
  • 8.5 inch (21.6 cm) diameter. 2.2 inch (5.6 cm) axial length.
  • Weighs only 4.5 pounds (2.0 Kg) in air.
  • Supplied with 50 feet (30 meters) of cable (Suprene 105, 18 AWG, 3/C SE00W, (UL) 600V, -60C to 105C, CSA LL39753 ST00W (TPE) 600 V, water resistant FT2).
  • Uses readily available Neutrik connectors.
  • Underwater Speaker Input Impedance: 4000 ohms.
  • Frequency range: 200 Hz to 32 KHz. Directional at higher frequencies.
  • Omni-directional beam pattern at 2 KHz.
  • Impedance varies with frequency but can be matched to 4 or 8 Ohm amplifier output tap with the included audio isolation impedance matching transformer assembly.
  • OPTIONAL: 70 Volt and 100 Volt transformers.
  • Can also be used as a receive hydrophone for underwater listening.
  • WARRANTY: Five years
  • The ONLY underwater speaker on the market that can be used as an air speaker without voiding the manufacturer’s warranty.
  • MADE in USA

Share your knowledge of this product with other customers... Be the first to write a review