 |
 |
 |
|
Kirby Morgan® now offers stainless steel helmets with colored Cerakote® finishes. The coating will be applied to the outside of the Shell and Pod ONLY, leaving the bottom ring area in its original finish as shown on the pictures.
The Cerakote® coating provides a cosmetic finish without affecting the performance of the stainless steel helmet. Colored Cerakote® stainless steel helmets are available in yellow, black, orange, green, purple, red, smoke, charcoal, blue, burgundy, and white. This is considered a cosmetic finish and is not covered by warranty.
For The Diver Who Wants An All Metal Helmet With The Sleek Style Of The 37, The Stainless Steel Kirby Morgan 37SS Helmet Is The Way To Go...
It features an all stainless steel shell, as well as a stainless sideblock, helmet ring, handle, and other key components. The SuperFlow® 350 is standard on this helmet.
The advantages of this stainless steel helmet include the following:
-Rugged helmet shell and other components
-No refinishing required if the surface is scratched or gouged
-Elimination of threaded inserts for securing port retainer to helmet shell
- The legendary performance of the KM 37 in a rugged stainless steel shell.
- Superior corrosion resistance for extreme diving environments.
- Designed for easy cleaning, ideal for contaminated water operations.
The Kirby Morgan KM 37SS Stainless Steel Diving Helmet offers the best of both worlds, and choosing where you buy it matters. Why shop with us at American Diving Supply? Because you get more than just a product, you get a partner. Our expert team provides unmatched support and deep product knowledge on all commercial diving equipment. When you're investing in premier dive helmets, you deserve fast shipping and the confidence that you're getting authentic gear. For the best selection of Kirby Morgan dive helmets and service you can trust, we are your top source for diving equipment online. Shop today. - Quad-Valve™ exhaust system for an exceptionally dry dive.
- Welded threaded inserts for secure accessory mounting.
- Compatible with most standard KM 37 parts for easy service.
Features:
-
SuperFlow 350 Regulator
This all metal, fully adjustable, Commercial Rated demand regulator provides easy breathing and excellent performance with low pressure compressors.
-
Air Train
The air train diffuses incoming breathing air/gas onto the face port/lens to defog and ventilate.
-
Auxiliary Port
The auxiliary port will allow for future add-ons and modifications to the stainless steel helmets. It is located on the port side of the shell as shown below.
-
Defogging Steady Flow Valve
Provides an additional flow of gas into the helmet for ventilation and defogging.
-
Emergency (EGS) Valve
Emergency (EGS) Valve supplies backup breathing gas to the diver. This valve is an integral, built in part of the stainless steel sideblock.
-
Gas Supply Non-Return Valve
Commercial Rated, It prevents loss of gas pressure in the event of umbilical damage.
-
Handle
Removable Grip and handle. Handle can be removed without breaking seals, making it quick and easy to attach accessories.
-
Nose Block
Nose Block Device allows the diver to block the nose to equalize ears.
-
Rapid Change Modular Communications Systems
Because the module is easily removed the helmet, repair or replacement of communications parts is quick and trouble free. It is available with either a male waterproof connector or a bare wire post connection.
-
Silicone Oral Nasal Mask
Made of a superior silicone material which is hypo-allergenic and has a longer work life than latex.
-
Stainless Steel Shell
After x-ray inspection, each 316 stainless steel shell, is precision CNC machined to tight tolerances, to ensure proper fit to all other mating parts. The shell is durable and easy to maintain. Easily cleaned using a Scotch Brite or similar type cleaning pad.
-
Stainless Steel Side Block
Multi use side block has additional ports built in to provide controlled air flow, if needed. The stainless steel sideblock has a built in EGS.
-
Whisker Wings
Bubble deflecting Whisker wings keep bubbles further from face port and ears, improving visibility and decreasing internal noise.
- Weight: KM 37SS - 30.96 pounds
- Helmet Shell: Stainless Steel
- Control Knobs: Polyurethane
- Face Port/Lens: Scratch Resistant Polycarbonate
- Neck Dam: Neoprene. Optional latex neck dam available
- O-Rings: Buna-N
- Head Cushion: Nylon bag filled with #4 Polyester foam
- Recommended Lubricants: All helmets and masks are lubricated at the factory with Christo-Lube. Kirby Morgan recommends Christo-Lube or Tribolube for all gas train components. Dow Corning 111 Silicone or equivelent may be used for helmet and mask components that are used with gas mixtures containing less than 50% oxygen.
- Regulator: The SuperFlow 350 regulator on the Kirby Morgan 37SS offers high performance. The regulator has been tested at Dive Lab at Panama City, Florida. It meets all current U.S. Navy and European diving standards.
- Cage Code: The cage code for identifying KMDSI products for U.S. government purposes is 58366.
- CR Standards: These helmets meet or exceed all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.
- CE Approved: The KM 37SS helmet is CE Approved.
- CE Certification: The Kirby Morgan 37SS helmet has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89/686/EEC and, as far as applicable, the EN 15333-1:2008/AC:2009 (class B). It is fully CE marked with demand regulator SuperFlow 350 and oral nasals P/N 510-690 and P/N 510-747 (now standard).
- Notes:
- The minimum operating temperature recommended for this helmet is 37 degrees F, only in regards to regulator performance. At the time of this writing, no hot water shroud is available for this helmet for heating the diver's breathing gas.
- Without a hot water shroud, the diver may be subject to hypothermia due to cold gas inspiration temperatures. Kirby Morgan makes no physiological recommendations regarding minimum safe operating temperatures for divers using this helmet.
- Usually the greatest danger of demand regulator icing will be encountered on deck when the surrounding air temperature is less than 32°F (0°C). This effect is primarily due to the refrigeration effect of breathing air pressure reduction, and the addition of moisture from the diver's exhalation coming in contact with the topside air temperature.
- Recommended overbottom (OB)gas supply pressure for best performance at depths are calculated by the formula (fsw x 0.445+14.7) + recommended p.s.i. g.
- KM 37 SS Stainless Steel Diving Helmet- Part # 500-100 (POSTS) or 500-101 (MWP)
- Logbook w/ pen- Part # 125-001
- Helmet/Mask Bag- Part # 500-901
- Tool Kit with Pouch- Part# 525-620
- Neck Dam Assembly, size Medium- Part# 525-628
- Head Cushion Assembly(Snoopy)- Part# 510-754
- Current Certification
- Test Specifications
- Warranty registration card
|
|
|
 |
|
 |
| WE RECOMMEND |
|
Kirby Morgan Neoprene Neck Dam Medium(Standard) 12"- 14" for KM 37, 47, 57, 77, 97, SL 17C, 17K Diving Helmets
|
|
Kirby Morgan Soft Goods Overhaul Kit for KM 37SS Diving Helmet
|
|
Kirby Morgan Head Cushion Assembly for KM 37, 37SS, 47, 57, 77, 97, SL 17C, 27 Diving Helmets
|
|
Kirby Morgan Regulator Rebuild Kit For KM 37, 37SS; SL 17B, 17C, 27 Diving Helmets
|
|
|
|
|
|
|
|
|
|
|
|
|
Innovative Dive Equipment Accessory Rail for Kirby Morgan Stainless Steel Dive Helmet
|
|
Kirby Morgan Communication Set For All Diving Helmets
|
|
Innovative Dive Equipment Light & Camera Mount Bracket With Universal Slide
|
|
|
|
|
|
|
|
|
|
|
|
|
Great hat 
