Kirby Morgan Bulletins
1999 Bulletins
Bulletin # 3 of 1999. November 12, 1999 - Swing Catch Retrofit & Locking Collar Plate
Bulletin # 2 of 1999. July 16, 1999 - Product material change to EXO� Hard Shell
Change to Product Bulletin # 1 of 1999. June 10, 1999 - Change of Yoke
Safety Bulletin # 1 of 1999. May 11, 1999 - Weld Strength
Caution Bulletin # 1 of 1999. May 7, 1999 - Communications Connection Nuts
Maintenance & Repair Bulletin # 1 of 1999. April 1999 - SuperLite� 17A/B & MK 21 Neck Clamp Numbering
1998 Bulletins
Bulletin # 3 of 1998. December 14, 1998 - Regulator Change
Bulletin # 2 of 1998. July 20, 1998 - Discontinued "As Standard" Head Cushion
Bulletin # 1 of 1998. April 7, 1998 - Product materials change to SuperLite� 17, MK 21 Visor & KMB 18 Comfort Insert
1997 Bulletins
Caution Bulletin #1 of 1997. October 15, 1997 - Predive Equipment Inspections
New Part Announcement Bulletin # 1 of 1997. August 20, 1997 - High Flow Emergency Valve
New Part Announcement Bulletin # 1 of 1997. August, 1997 - DCS-2A without communications
Change to Product Bulletin # 1 of 1997. March 10, 1997 - Locking Device for Yoke
1996 Bulletins
Bulletin # 1 of 1996. August 1996 - New silicone oral nasal mask part number 510-690
1995 Bulletins
Bulletin # 4 of 95. December 15, 1995 - 1) Swing Catch RetroFit & 2) Locking Collar Plating
Bulletin # 3 of 1995. December, 1995 - Drawstring Neck Dam Alteration for Fit
Bulletin # 2 of 1995. March 10, 1995 - Locking Device for Yoke
Change to Product Bulletin # 1 of 1995. February 22, 1995 - O-ring Material change
Safety Bulletin # 1 of 1995. January, 1995 - Counterfeit Kirby Morgan KMB-18 BandMask Diving Masks and SuperLite-17 Diving Helmets
1994 Bulletins
Bulletin #1 of 1994. January, 1994 - An unauthorized hole drilled in the shaft of a Plunger (P/N 550-016) on Latch Catch Assembly
1993 Bulletins
Bulletin # 1 of 1993. October, 1993 - High Flow Emergency Valve
1992 Bulletins
Caution Bulletin # 1 of 1992. April 23, 1992 - Possible loosening of Emergency Valve Assembly
Safety Bulletin # 1 of 1992. April, 1992 - SuperLite-27 Commercial Diving Helmet
1991 Bulletins
Safety Bulletin # 1 of 1991. June 5, 1991 - SuperLite-17 Commercial Diving Helmet
Caution Bulletin # 1 of 1991. April 26, 1991 - POSSIBLE LOOSENING OF LATCH CATCH ASSEMBLY PLUNGER (P/N 550-016), SCREW (P/N 530-205), AND SPRING (P/N 535-801) on the SuperLite 17 A/B Helmet.
1989 Bulletins
Bulletin # 1 of 1989. September, 1989 - Non-Diving Failure Of Stainless Steel Adapter On The Side Block Of The DSI� SuperLite�-17 B Reclaim Helmet During Servicing
1987 Bulletins
Bulletin # 1 of 1987. June 10, 1987 - SuperLite� 17 A/B Yoke Systems - Old Style catch
|
|
|
