 |
 |
 |
|
The TransPac is Dive Rite’s flagship harness, originally designed by CEO Lamar Hires for his early expeditions to the remote karst regions of Japan. He needed a rugged harness system that would allow him to utilize backmounted doubles and a single tank, as well as sidemount in some of the smaller passages. The TransPac is not only an incredibly versatile diving tool, it was also designed to be comfortable enough to hike tanks through thousands of feet of dry cave passage. Dive the TransPac Harness with a single tank, backmounted doubles, sidemount, or with a rebreather by simply swapping out the wing along with some additional mounting accessories. The TransPac is compatible with any wing in the Dive Rite line. Add accessories like gear pockets, weight pockets, a line cutter, knife, or additional D-rings with ease. Available in sizes small to XXL (including Large Short and XL Short options). When diving the TransPac XT Harness with backmounted doubles, you must use the TransPac Doubles Adapter Plate. Made in the USA.
- Weight: 4.25-5 pounds (2-2.25 kg) depending on size
- Backplate: 1000 denier nylon fabric
- Webbing Size: 2 in (50 mm). Rated at 7,000 pounds of breaking strength
- Hardware Material: Laser cut marine-grade stainless steel and black hard coat anodized aluminum
- D-Ring Size: 2 in (50 mm)
- Cam Strap Dimensions: 2 x 36 inches (5 x 91.4 cm)
- Crotch Strap Size: 1.5 inches (3.8 cm)
- Quick-Release Buckles Material: Acetal resin
|
|
|
 |
|
 |
|
![First Watch RBA-100 Micro Inflatable Emergency Vest [RBA-100]](http://cdn4.volusion.store/ghqkt-ccqsw/v/vspfiles/photos/CWR-72952-1.jpg?v-cache=1774006486)
![Scanstrut ROKK Mini Cable Tie Mount [RLS- 403]](http://cdn4.volusion.store/ghqkt-ccqsw/v/vspfiles/photos/CWR-59285-1.jpg?v-cache=1774006486)
