 |
 |
 |
|
The MTX-RC Single Cylinder Long Hose set is designed for the diver that prefers a long hose configuration on a single cylinder. It is also the perfect set-up for the recreational diver looking to transition into twinset diving in the future, as the addition of another first stage creates a twinset regulator configuration.
Combining rugged, military grade engineering with the super-smooth breathing experience that Apeks regulators are renowned for, the MTX-RC single cylinder set dives your way. Featuring the same freeze-resistant technology enjoyed by the whole MTX-R range, the MTX-RC resists freeflows in even the coldest temperatures, while offering the user the additional flexibility to dial it out for a comfortable breathe in less extreme environments. All this is achieved using an innovative first stage design that protects the regulator from freezing and a full set of user controls on the second stage to adjust the breathing performance based on the diver’s individual needs.
- Weight DIN – 1.193 kg (2.63lbs)
- Max working pressures 1st Stage: DIN - 300 bar (4351 psi) Yoke - 232 bar (3365 psi)
- 2nd Stage: 9-10 bar (131-145 psi)
- Certified to: EN250A
- Temp range 0.5°C - 55°C
- Connections DIN and Yoke
- Nitrox/Oxygen compatible Up to 40% O2 outside the EU (European Union), within the EU anything above 21% O2 must use an M26 Connection.
The package includes 2 x MTX-RC primary second stages, 1 x MTX-RC first stage, 1x 2.1m hose, 1x 49cm hose (both double swivel hoses), a HP hose and a TEK SPG. Includes a tactical style messenger bag to keep your regulators safe on your travels. Perfectly sized for a laptop, it’s also your new work bag!
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Satin plated brass body with heat exchanging ribs for maximum thermal performance.
- Break through, innovative over-moulded first-stage endcap and environmental diaphragm helps prevent ice build-up that can cause first stage free flow in extreme circumstances. Also protects the first stage from impact damage.
- Ribbed diaphragm clamp for improved heat exchange in cold water conditions.
- Unique over-balanced diaphragm design – as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a faster rate than ambient. This results in superior performance at depth.
- 5 x medium pressure ports, 4 mounted on a rotating turret for improved hose orientation
- 2 x angled high pressure ports for optimal hose routing and fitting of transmitters.
- Double swivel hose for greater freedom of movement and comfort.
- Easy to grip DIN hand-wheel or over-moulded yoke hand-wheel, only requires one hand to release.
- DIN, Yoke and M26 Thread available, 300bar, 232bar and M26 300bar (O2) respectively.
- Tested for Octopus use - EN250A to 60 meters cold water.
- Nitrox/Oxygen compatible – Up to 40% O2 outside the EU (European Union), within the EU anything above 21% O2 must use an M26 Connection.
|
|
|
|
|
|
|
![Powerwinch Utility Series Winch 2,500lb, 2 Speed, 6" Crank Arm - Zinc [21500-W-2500-6-Z-R]](http://cdn4.volusion.store/ghqkt-ccqsw/v/vspfiles/photos/CWR-110737-1.jpg?v-cache=1777037000)
![Hella Marine NaviLED PRO Port Navigation Lamp - 2nm - White Shroud [017460011]](http://cdn4.volusion.store/ghqkt-ccqsw/v/vspfiles/photos/CWR-104405-1.jpg?v-cache=1774006486)
