 |
 |
 |
|
The HYCON HCS cut-off saws cut all types of concrete, steel, brick wall, asphalt, etc. The HYCON cut-off saw is a very sturdy tool for cutting even under extreme conditions. It is completely unaffected by water and dust, and all parts run in oil. The HYCON HCS saws are built for hard use day after day – without breakdowns.
The fact that the saw always works and does not require service means higher profit than using, e.g., a gas engine saw.
The hydraulic cut-off saw from HYCON can be used for horizontal and vertical cutting. The saw stops automatically if the blade jams thanks to the system pressure relief valve. The blade stops rotating a maximum of 10 sec. after releasing the trigger, ensuring no injury to the operator.
Hydraulic direct drive high-quality motor ensures a minimum of service. Flushing water runs through the body and hydraulic motor for extra cooling and to keep all surfaces cold.
- MAX BLADE CAPACITY: 20" Max
- CUTTING DEPTH: 8-3/4"
- OIL FLOW: 8-10 GPM / 30-40 LPM
- WORKING PRESSURE: 1,800 PSI / 120 BAR
- MAX PRESSURE: 2,500 PSI / 172 Bar
- FOR USE UNDER WATER: Yes
- RPM: 1,500 - 2,300 RPM
- BLADE PERIPHERAL SPEED MAX: 59 M/S
- SOUND POWER LEVEL LWA: 110 DB
- WARRANTY: 12 months
- SHIPPING WEIGHT: 21 lbs
- UNBOXED WEIGHT: 34 lbs
- Made In Denmark
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 20" Blade capacity
- Oil Flow 8-10 GPM / 30 - 40 LPM
- Working Pressure 1,800 Psi / 120 BAR
- Max Pressure 2500 Psi / 172 BAR
- 1" Blade Arbor
- 1500-2300 RPM
- Will cut any material including rebar
- ASCO System (Automatic Safety Cut off)
|
|
|
|
|
|
|