 |
 |
 |
 |
|
 |
|
Features
- State of the art in PIEZOELECTRIC FLEXURAL DISK TECHNOLOGY!
- LONG LIFE CONSTRUCTION WITH PVC AND EPOXY.
- Will not rust or corrode even if used in saltwater. Can be used in swimming pools with salt generators.
- Galvanic corrosion has been eliminated. Non-Magnetic materials.
- No metal exposed to the water, reducing the potential for electric shock.
- No voice coil to burn out.
- A completely passive, non-powered device. UL, CSA and CE are not required.
- Acoustic power to spare with high efficiency.
- Deep depth capability (130 feet/40 meters).
- 8.5 inch (21.6 cm) diameter. 2.2 inch (5.6 cm) axial length.
- Weighs only 4.5 pounds (2.0 Kg) in air.
- Supplied with 25 feet (15 meters) of cable (Suprene 105, 18 AWG, 3/C SE00W, (UL) 600V, -60C to 105C, CSA LL39753 ST00W (TPE) 600 V, water resistant FT2).
- Uses readily available Neutrik connectors.
- Underwater Speaker Input Impedance: 4000 ohms.
- Frequency range: 200 Hz to 32 KHz. Directional at higher frequencies.
- Omni-directional beam pattern at 2 KHz.
- Impedance varies with frequency but can be matched to 4 or 8 Ohm amplifier output tap with the included audio isolation impedance matching transformer assembly.
- OPTIONAL: 70 Volt and 100 Volt transformers.
- Can also be used as a receive hydrophone for underwater listening.
- WARRANTY: Five years
- The ONLY underwater speaker on the market that can be used as an air speaker without voiding the manufacturer’s warranty.
- MADE in USA
|
|
|
|
|
|
|